将传感器主体在柜内合适位置通过导轨或者扎带捆绑的方式固定好；NTC探头通过螺丝、捆绑或硅胶粘贴等方式固定。用AC/DC 85~265V电源给传感器供电，上电时电源指示灯红灯闪烁2次。
Fix the sensor body in a suitable position inside the cabinet by binding it with guide rails or straps; The NTC probe is fixed by means of screws, bundling, or silicone bonding. Power the sensor with an AC/DC 85-265V power supply, and the power indicator light flashes red twice when powered on.
